China Stainless Steel Support Leg Cylinder Manufacturer, Supplier, Factory

Injection molding machine injection hydraulic cylinder produced by Qingdao Micro Precision Machinery Co., Ltd. in China is used to inject molten plastic material into the grinding tool to form the required product. The working principle is to use the hydraulic system to hydraulically pump high-pressure oil into the cylinder to push the piston. Move forward and inject the injection molding material into the mold.

Crane counterweight hydraulic cylinder is an important device that realizes crane balance through hydraulic transmission mechanism. It is mainly composed of cylinder body, piston, piston rod, sealing element, oil filter, hydraulic pipeline and oil tank. The working principle is based on Pascal's law, that is, in a closed container, pressure is transmitted to every point in the liquid, and the pressure acting on the liquid is proportional to the area. When the crane is lifting, the hydraulic pump presses the oil into the cylinder, causing the piston to rise, thereby increasing the hook height. When the load of the crane increases, the oil inside the cylinder will be compressed and the piston will drop, thus achieving the balance of the crane.

The China Sanitation Vehicle Locking Cylinder produced by Micro Precision Machinery is a critical hydraulic component in sanitation vehicles, used to securely lock and release compartments or compacting mechanisms. With a compact design and high load capacity, it ensures stable operation under heavy-duty conditions, enhancing safety and efficiency.

Hydraulic Cylinder for Crane Support Legs is an important part of the crane outrigger system. It adopts the hydraulic transmission principle and drives the outriggers to extend and retract through liquid pressure to achieve stable support of the crane. The hydraulic cylinder is mainly composed of cylinder barrel, piston, seal and guide sleeve. The hydraulic oil enters the cylinder barrel through the pipeline, pushing the piston to reciprocate in the cylinder barrel, thereby realizing the extension and retraction of the outrigger.

Oil seal RS series, also known as the piston rod one-way sealing ring, is composed of an anti-wear filled polytetrafluoroethylene PTFE ring and an O-type rubber sealing ring. The O-type ring provides elasticity to compensate for the wear of the PTFE step ring and only has a one-way sealing effect.

Glyd ring for piston is composed of a rubber O-ring and a PTFE ring. The O-ring applies force and the Glyd ring is a double-acting piston seal. It has low friction, no creeping, small starting force, and high pressure resistance. It can be divided into Glyd rings for holes and Glyd rings for shafts.