Injection Cylinder with Integrated Control System

The hydraulic station valve block is an automation component operated by pressure oil. It is controlled by the pressure oil of the pressure distribution valve. It is usually used in combination with the electromagnetic pressure distribution valve and can be used to remotely control the on and off of the oil, gas and water pipeline systems of hydropower stations.

CA-08A-3C Hydraulic Cylinder Balance Valve Block material: Q355D forged, 20# steel, GGG50, etc. Each piece is subject to flaw detection testing to prevent oil leakage and oil channeling in the hydraulic valve block.

Excavator Bulldozer Hydraulic Cylinder is a device that converts hydraulic energy into mechanical energy, and is mainly used to achieve linear reciprocating motion or swinging motion. The hydraulic cylinder is mainly composed of a cylinder barrel, a cylinder head, a piston and a piston rod, a sealing device, etc. Its output force is proportional to the effective area of the piston and the pressure difference on both sides.

Crane counterweight hydraulic cylinder is an important device that realizes crane balance through hydraulic transmission mechanism. It is mainly composed of cylinder body, piston, piston rod, sealing element, oil filter, hydraulic pipeline and oil tank. The working principle is based on Pascal's law, that is, in a closed container, pressure is transmitted to every point in the liquid, and the pressure acting on the liquid is proportional to the area. When the crane is lifting, the hydraulic pump presses the oil into the cylinder, causing the piston to rise, thereby increasing the hook height. When the load of the crane increases, the oil inside the cylinder will be compressed and the piston will drop, thus achieving the balance of the crane.

Hydraulic Cylinder for Crane Support Legs is an important part of the crane outrigger system. It adopts the hydraulic transmission principle and drives the outriggers to extend and retract through liquid pressure to achieve stable support of the crane. The hydraulic cylinder is mainly composed of cylinder barrel, piston, seal and guide sleeve. The hydraulic oil enters the cylinder barrel through the pipeline, pushing the piston to reciprocate in the cylinder barrel, thereby realizing the extension and retraction of the outrigger.

The primary function of the reducing sleeve is to connect tool holders of different diameters with the spindle, ensuring a stable tool system rotation and meeting high precision requirements. Our reducing sleeve is an auxiliary positioning and fixing tools.